Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-34 GR2K-GA-0014
Ver. 07-02
export: route-filter not found at <Value> The specified ID is not defined. Specify the defined ID
<Value>: specified ID
export: Set-attribute "<Name>" cannot be
specified
Filter information inherent to IPv4 is defined in IPv6. Do not specify
the filter information inherent to IPv4.
<Name>: Specified identifier
export: Set-attribute not found at <Value> The specified ID number is not defined, or cannot be found. Specify
the defined ID number
<Value>: Specified ID number
export: syntax error Syntax error
export: tag option of route-filter must not be
define for { bgp | bgp4+ | rip | ripng }
The tag option of a router filter is defined for an export filter or BGP/
BGP4+/RIP/RIPng protocol. Do not specify a tag option.
export: type option of route-filter must not be
define for { bgp | bgp4+ | rip | ripng }
The type option for the route filter is defined against the BGP/BGP4+/
RIP/RIPng protocol. Do not specify the type option.
hosts: address should not be v4-compat An IPv4-compatible address is specified in an address. Specify
addresses other than the IPv4-compatible address.
hosts: address should not be v4-mapped An IPv4 mapped address is specified in an address. Specify
addresses other than the IPv4 mapped address.
hosts: last 64bit of IPv6 host address should
not be all-zero
The lower-order 64 bits of the host address are all specified with
zero. Specify the address so that all of the lower-order 64 bits are not
zero.
hosts: linklocal address should be followed by
% (IPv6 interface name)
An interface name is not specified in the specified link local address.
Specify an interface name with the percent (%) interposed when
specifying a link local address.
import: address not IPv6 Addresses other than an IPv6 prefix are specified. Specify the IPv6
prefix.
import: address should not be:: Default address is specified in the address. Specify addresses other
than the local host address.
import: address should not be v4-compat An IPv4-compatible address is specified in an address. Specify
addresses other than the IPv4-compatible address.
import: address should not be v4-mapped An IPv4 mapped address is specified in an address. Specify
addresses other than the IPv4 mapped address.
import: Attribute-filter " <Name>" cannot be
specified
Filter information inherent to IPv4 is defined in IPv6. Do not specify
the filter information inherent to IPv4.
<Name>: Specified identifier
import: Attribute-filter not found at <Value> The specified ID number cannot be found. Specify the defined ID
number
<Value>: Specified ID number
import: attribute-list name "<Name>" longer
than 15 characters
The specified ID exceeds 15 characters. Specify ID by 15 or less
characters.
<Name>: Specified ID
import: {bgp|bgp4+} attribute option of
route-filter must not be define for
{rip|ripng|ospf_ase|ospf6_ase}
The BGP/BGP4+ attribute option for the route filter is defined against
the RIP/RIPng/OSPFASE/OSPF6ASE protocol. Do not specify the
BGP/BGP4+ attribute option.
import: duplicate AS path pattern in list In the import definition, an AS path pattern is duplicated. Use a
unique AS path pattern.
import: duplicate autonomous-system in list at
<As>
In the import definition, an AS number is duplicated. Use a unique AS
number.
<As>: Specified AS number
import: duplicate entry at <Address> mask
<Mask> [exact | refine]
In the import definition, a network range is duplicated. Specify a
unique network range.
import <Address>: Specified Address
<Mask>: Specified Mask
Table 5-5 Routing Protocol Error Messages (continued)