Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-12 GR2K-GA-0014
Ver. 07-02
Relations between total of vp and vp shaping
number are inconsistent.
Relations between total of vp and vp shaping number are
inconsistent. Specify the VP count to the maximum VP count of VP
shaper or less.
Relations between traffic abr pcr and vp pcr
are inconsistent.
Relations between traffic abr pcr and vp pcr are inconsistent.
Set to PCR of PCR =< VP of ABR traffic.
Relations between traffic gfr mcr and vp pcr
are inconsistent.
Relations between traffic gfr mcr and vp pcr are inconsistent.
Set to MCR =< VP of GFR traffic.
Relations between traffic gfr2 mcr and vp pcr
are inconsistent.
Relations between traffic gfr2 mcr and vp pcr are inconsistent. Set
the correct value.
Relations between traffic gfr pcr and vp pcr
are inconsistent.
Relations between traffic gfr pcr and vp pcr are inconsistent.
Set to PCR of PCR =< VP of GFR traffic.
Relations between traffic gfr2 pcr and vp pcr
are inconsistent.
Relations between traffic gfr2 pcr and vp pcr are inconsistent. Set the
correct value.
Relations between traffic type and service
category pattern are inconsistent.
Relations between traffic type and service category pattern are
inconsistent. Specify the traffic type appropriate for the service
category pattern.
Relations between traffic type and vp shaping
number are inconsistent.
Relations between traffic type and vp shaping number are
inconsistent. When the maximum VP count of VP shaper is no,
specifyonlyUBRfortraffictype.
Relations between traffic vbr pcr and vp pcr
are inconsistent.
Relations between traffic vbr pcr and vp pcr are inconsistent.
Set to PCR of PCR =< VP of VBR traffic.
Relations between vci and vpi vci range are
inconsistent.
Relations between vci and vpi vci range are inconsistent.
Set VCI value within the range of VPI/VCI.
Relations between vpi and vpi vci range are
inconsistent.
Relations between vpi and vpi vci range are inconsistent.
Set VPI value within the range of VPI/VCI.
Relations between vpi vci range and vp
shaping number are inconsistent.
Relations between vpi vci range and vp shaping number are
inconsistent. Specify the value within the range of VPI/VCI to the
maximum VP count of VP shaper.
RmEthernet is not supported. Can not set rmEthernet. RmEthernet is not supported.
Scr not specified. Scr not specified. Set SCR.
Server rate2 is greater than server rate1. Minimum throughput rate 2 of sending to network at heavy
congestion change exceeds minimum throughput rate 1 of sending
to network at heavy congestion change.
Specify the value so minimum throughput rate 2 of sending to
network at heavy congestion change does not exceed minimum
throughput rate 1 of sending to network at heavy congestion change.
The total of <item> exceeded <value>. The total of <item> exceeded <value>. Set <item> in range.
The total of bandwidth is greater than
6144kbps.
Total of bandwidth of DLCL in the line is greater than 6144 kbps.
Specify the value so the total bandwidth of DLCL in the line becomes
no greater than 6144 kbps.
The total of line (same dch line is specified)
exceeded 16.
The total of line (same dch line is specified) exceeded 16. Set 16 or
less lines.
The total of line (same dch line is specified)
exceeded 4.
The total of line (same dch line is specified) exceeded 4 (if the call
number length is 4). Set 4 or less lines.
The total of line (same dch line is specified)
exceeded 8.
The total of line (same dch line is specified) exceeded 8. Set 8 or less
lines.
The total of line and subline (same RP is
specified) exceeded 32.
The total of line and subline (same RP is specified) per 1RP
exceeded 32. Set 32 or less.
the total of timeslot (pri line no. 4,5,6,7)
exceeded 31.
The total of timeslot (pri line no. 4,5,6,7) exceeded 31. With the J1
line number of 4, 5, 6 or 7 and with the J1_8 line version, the total
number of time slots shall not exceed 31.
The total of timeslot and line without timeslot
configuration (same RP is specified)
exceeded 256.
The total of timeslot and line without timeslot configuration exceeded
256. Set 256 or less.
Table 5-3 Network Interface Error Messages (continued)