Filter
Top Products
SNMP Information
GR2K-GA-0014 3-19
Ver. 07-02
3.1.4 event
Function
Object for creation, modification, deletion, and display of RMON (RFC1757) Ethernet
event-group information. A maximum of 16 event-group entries can be registered per
router. The RMON Ethernet event-group MIB contents can be referenced by the
device management command snmp.Forthissnmp command, see the GR2000
Operations Commands, Vol. 1.
Input Format
To create an RMON Ethernet event-group entry:
To modify an RMON Ethernet event-group entry:
To delete registered RMON Ethernet event-group entries:
To show registered RMON Ethernet event-group entries:
Parameters
Description: Specifies the RMON Ethernet event-group index number. This
parameter corresponds to eventIndex of RFC1757.
Default: Undefined (but cannot be omitted)
Range of value: 1-65535
Description: Sets the method for alarming the specified event. The none
option causes no alarm. The log option records every alarmed
event. The
trap option causes transmission of SNMP trap to
the specified community. The
every
alarmed event and causes transmission of SNMP trap to the
specified community. This parameter corresponds to eventType
of RFC1757.
Default: Undefined (but cannot be omitted for the first time)
Range of value: none, log, trap or log-trap
Description: Sets the community to which an SNMP trap is transmitted
when the
trap or log_trap option is specified for the -type
parameter. The parameter corresponds to
eventCommunity of RFC1757.