Filter
Top Products
Operation Management Information
GR2K-GA-0014 4-49
Ver. 07-02
Parameters
The initial value items that can be set using ISDN Information and the initial values
during initial installation are shown in Table 4-12. For details of each parameter,
refer to the configuration definition information in "ISDN Information".
Table 4-12 List of Initial Values That Can Be Set Using ISDN Information and Initial
Values During Initial Installation
Information
Group Name
Information Name Initial Value
ISDN
information
Use of connection destination Can be used.
Outgoing/incoming call type Used for both outgoing and
incoming calls.
Non-communication monitoring time (just after call
setting)
178 seconds
Non-communication monitoring time (except just after
call setting)
60 seconds
Direction of connection suppression Both outgoing and incoming
calls are suppressed.
Number of connection retries when a layer 1 failure
occurs during ISDN connection
Two times
Connection retry interval when a layer 1 failure occurs
during ISDN connection
6 seconds
Maximum connection monitoring time 60 minutes
Type of channel used Connection of channel B
Maximum value of MTU length in remote router 4500 bytes
Number of retries in Echo-RQ frame 7 times
Minimum number of reception Echo-Reply times for
judging "high"-quality link
6times
Report of local IP address The local IP address is not
reported.
Remote IP address mode A correct IP address is
distributed as an IP address
distribution request.