Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-82 GR2K-GA-0014
Ver. 07-02
Relation between Rate1, Rate2, Rate3 and
Rate4 are inconsistent.
The sum total of the maximum send bandwidth of each queue is
greater than 100%. Set the value so that the sum total does not
exceed 100%.
The total of QoS queue list bandwidth
exceeded 100%.
Total of QoS queue list bandwidth values exceeded 100%. Decrease
the total to 100% or less.
The total of traffic peak rate, traffic min rate
exceeded bandwidth traffic.
The sum of the queue traffic minimum guarantee band and the
queue traffic maximum restriction band exceeds the band allocation
control (traffic). Set it so that the value is less than the band
allocation control (traffic).
Relations between traffic min rate and traffic
peak rate are inconsistent.
Relations between traffic min rate and traffic peak rate are
inconsistent. Set the correct value.
Relations between traffic peak rate and
bandwidth traffic are inconsistent.
Relations between traffic peak rate and bandwidth traffic are
inconsistent. Set the correct value.
Invalid UPC group No. The upe group number is incorrect. Set the value correctly.
Invalid UPC mode. The band control (max_rate_importance, max_rate_normal,
min_rate_importance, min_rate_normal) has been set incorrectly.
Set the value correctly.
UPC bandwidth not specified. The contract band when the contract band surveillance function is in
use has not been set. Set the contract band.
Can not set flow configuration,qos_ip_list or
filter_list configuration simultaneously.
It is not possible to simultaneously set flow configuration information
and "qos_ip_list" or "filter_list" in the configuration definition file.
Delete "qos_ip_list" or "filter_list" in order to set flow configuration
information. In addition, delete flow configuration information in order
to set "qos_ip_list" or "filter_list."
Table 5-9 Filter and QoS Information (Other than Flow Information) Error Messages