Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-100 GR2K-GA-0014
Ver. 07-02
5.20 DHCP Client Information
5.21 NAT-PT
Table 5-20 DHCP Client Information Error Messages
Message Contents
dhcp-client: maximum number of interfaces
already defined
Interfaces are being added that exceed the maximum interface
count. Delete unneeded interfaces before adding new ones.
dhcp-client: interface already used by other
function
The specified interface is already in use by a function other than
DHCP client.
dhcp-client: definition of IP address is not
necessary for the interface used by DHCP
client
An IP address definition is not required for the interface used by the
DHCP client.
dhcp-client: interface not found at ’<Interface
Name>’
The specified interface does not exist.
Set the correct interface name.
dhcp-client: invalid host-name This is an invalid host name. Specify the correct host name.
dhcp-client: invalid dhcp-client-id-str This is an invalid client ID. Specify the correct client ID.
dhcp-client: invalid DHCP option This is an invalid DHCP option. Specify the correct DHCP option.
Table 5-21 NAT-PT Error Messages
Message Contents
illegal IP address format. The IP address entry format is invalid.
illegal parameter. The parameter is invalid.
Invalid NAT-PT prefix. The NAT prefix is invalid. The following are possible reasons.
1. Host address is not 0.
The length of the network prefix is 96 bits. Set the host address so that it is
0.
2. A link-local prefix has been set.
It is not possible to set link-local prefixes. Set a different network prefix.
Invalid port range. The post-translation port number range set by dynamic NAPT-PT translation
rules is invalid. Set the first port number so that it is smaller than the last port
number.
Natpt not specified. The NAT-PT prefix is not set. Set a NAT-PT prefix first when setting NAT-PT
information.
out of range. The specified parameter exceeds the range. Set the value within the range.