Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-119
Ver. 07-02
Description: Specifies the ICMP code number in decimal.
Default: Undefined
Range of value: 0–255
Description: Specifies the IGMP type number in decimal. When specifying
this parameter, define 2 (IGMP) to -protocol. If -protocol is
undefined or defined other than 2 (IGMP), this parameter
becomes invalid.
Default: Undefined (Does not include IGMP type to the -filter condition.)
Range of value: 0–255
Description: Specifies the connection branch index number (specified by
the DLCI-group information or VC-group information) in
decimal. When a packet that matches the filter condition is
relayed, the DLCI/VC specified in the group is selected and
transmitted. Select the filter list information that sets the
connection branch index number as a transmitter’s filter
condition by means of
-out (outbound) parameter of the
filter-interface object.
Default: Undefined
Range of value: 0–7
Description: Enables the policy routing function by specifying the
destination interface name (same as the line name set by the
ip object) and the next hop IP address. The policy routing
function causes the local device to relay a received packet to
its destination if it matches the filter condition. Select the filter
list information that sets the policy routing as a receiver’s filter
condition by means of
–in (inbound) parameter of the
filter-interface object.
Default: No policy routing
Range of value: Interface name: One of the line names set by the
ip object.
Table1-63 IGMPTypeNumber
IGMP Type No. (h) Input Value (Decimal) Name
0x11 17 Membership Query
0x12 18 Version 1 Membership Report
0x13 19 DVMRP protocol
0x16 22 Version 2 Membership Report
0x17 23 Version 2 Leave Group
0x22 34 Version 3 Membership Report