Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-16 GR2K-GA-0014
Ver. 07-02
Description: Specifies the SMTP server host name or IPv4 address for
sending e-mail reports
Description: Specifies the SMTP server port number for sending e-mail
reports
Default: Standard value (25)
Range of value: 0 - 655535 (decimal). If set to 0, it operates at the standard
value (25).
Specifies the e-mail destination maintenance service center. Our GR2000
Product Support Service (PSS) is used by specifying "assist."
Specifies the destination e-mail address
Specifies the code that enables the e-mail destination maintenance service center
to identify the reported device. The manufacturing number of the device is
specified. Refer to Table 4-1, Location of appended manufacturing number seals,
which are appended to the device in the locations indicated below.
Table 4-1 Location of appended manufacturing number seals
Model Location of appended manufacturing number seals
GR2000-1B Bottom of the device
GR2000-2B Bottom of the device
GR2000-2B+ Bottom of the device
GR2000-BH Bottom of the device
GR2000-2S Lower right viewed from the front
GR2000-4S Lower right viewed from the front
GR2000-6H Lower right viewed from the front
GR2000-10H Lower left of NIF board insertion surface
GR2000-20H Lower left of RP board insertion surface
GR2000-4 Lower right viewed from the front
GR2000-10 Lower right of NIF board insertion surface
GR2000-20 Lower left of NIF board insertion surface