Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-23
Ver. 07-02
6. Indicating the set information:
All the contents set for the flow control function are indicated.
7. Indicating the set filter list and Qos list entry number.
Related Commands
flow, flow filter, flow qos, filter, filter-list, qos, qos-ip-list
Related Information
For the COPS function, see the GR2000 Applications Guide.
Precautions
1. This command cannot be set when setting the filter-filter (filter list information)
or qos-ip-list (QoS IP frame condition information). Delete all the filter-list and
qos-ip-list before setting this command.
2. In the case where log-in has been performed via the network, if the parameter of
this command is changed from no to yes by using the operating constituting
definition, be careful because it is possible that the filtering function may become
activated. Depending on the contents of the definition of the filtering, the
connection may be disrupted.
3. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the
apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.