Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-140 GR2K-GA-0014
Ver. 07-02
: equal minimum bandwidth guarantee
: minimum bandwidth guarantee (kbps)
: bandwidth control (traffic)
<maximum transmission band of a line>.
Default: None
Range of value:
Thesettingrangeofavaluediffersforeachlinetype.
Table1-68showstherangeinwhichthemaximum
transmission band of a line can be set.
Default:
priority
Table 1-68 Maximum Range of Send Bandwidth
RP Type NIF Type Line type
Range (*1) (*2)
4 Number of
Queues
8Numberof
Queues
32 Number
of Queues
64 Number of
Queues(*3)
RP-A1,RP-D,
RP-D6, RP-DV
NE100-8TB 10BASE-T
full-duplex
-- 1536 -100000 -- --
100BASE-T
full-duplex
-- 1536 -
1000000
-- --
NE1G-1SB 1000BASE-SX -- 1536 -
7000000
6144 -
7000000
--
NE1G-1LB 1000BASE-LX -- 1536 -
7000000
6144 -
7000000
--
NE1G-1LHBA 1000BASE-LH -- 1536 -
7000000
6144 -
7000000
--
RP-C,RP-C6,
RP-CV
NE1G-4C 1000BASE-SX
1000BASE-LX
1000BASE-LH
-- 1536 -
7000000
6144 -
7000000
--
GR2000-1B
GR2000-2B
Ethernet
containing
GR2000-1B
and
GR2000-2B
NEB100-4TB
NEB1G-1B
10BASE-T
full-duplex
320 - 10000 640 - 10000 -- 5120 - 10000
100BASE-TX
full-duplex
320 - 10000 640 - 10000 -- 5120 - 10000
1000BASE-SX
1000BASE-LX
1000BASE-LH
320 - 590000 640 - 590000 -- 5120 - 590000
GR2000-BH NEBH1G-4C 1000BASE-SX
1000BASE-LX
1000BASE-LH
-- 1536 -
1000000
6144 -
1000000
--
*1: The maximum transmission band of the line can be set in 1 kbit/s units.
*2: The router operates based on the output priority control when the value out of the range that can be set in the
maximum transmission band of a line is set. If the maximum queue number has not been specified or if an ineffective
value has been set, the number is automatically set at 8 (4 in the case of Ethernet containing GR2000-1B and
GR2000-2B).
*3: the maximum queue number can be set at 64 only when set to one line (Line number zero). The queue mode that
can be used for each media type is as shown in the table below.