Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-153
Ver. 07-02
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
8. When the queue mode is set to the band control (traffic designation) using this
command,setinthesamelinesothatthetotalofmin_rateforthequeueof
which traffic type is guarantee, peak_rate for the queue of which traffic type is
constant,and192kbit/sforthequeueofwhichtraffictypeisnotsetbecomes
less than the maximum transmission band of a line.
9. If addition/deletion/change in the parameters is executed in the qos-queue-list
(QoS attribute) in NE100-STB, communication in all of the lines in the same NIF
is temporarily disabled.
1.2.3 qos-interface
Applies the QoS queue list to an interface. A maximum of 480 entries may be created
for each RP.
Input Format
Setting information
Modifying information
Table 1-74 Relationship Between Priority Determination Among Minimum Bandwidth
Guarantee (kbit/s), Band Control (Traffic Designation), and Flow Control
Method for Deciding
Priority in Flow Control
Subject
Configuration
Command
Subject
Parameter
Advisability of Executing Functions of the
Minimum Bandwidth Guarantee (kbit/s
designation), and Band Control (Traffic
Designation)
Designation for out put
priority
qos-ip-list priority_class √
flow qos priority √
Designation for DSCP
rewritten value
filter-list replace_tos x
qos-ip-list replace_tos x
flow filter replace_dscp x
flow qos replace_tos x
Designation for input
packet DSCP value
qos-ip-list tos-map x
flow qos tos-map x
√
: Execution possible x:Execution impossible.
(*1): Only PR-A1 can be executed.