Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-107
Ver. 07-02
Precautions
1. Determination of the QoS flow is performed in the order of the list number
specified in the input/output interface in the QoS flow information (the order of
display when
show flow qos is executed).
2. When setting the
qos-ip-list (QoS IP frame condition information) or filter-list (filter
list information), this command cannot be set. Delete both
qos-ip-list and filter-list
before setting this command.
3. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the
apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
4. Flow information consumes 101 entries in each RP when address conversion
(nat) is set. Therefore, when address conversion (nat) is set, the maximum entry
count is decreased by 101 per RP capable of flow information definition.
Table 1-55 Features of Constituting Definition of Filter Flow Information by Input Form
Item
Constituting Definition Inputting Form
qos-ip-list,
qos-ip-list-group,qos-ip
flow filter
Number of entry(*1) 1024 entry/device 10000 entry/device 2000 entry/RP
Inputting form Input three commands to define
one list. Effective in defining the
same flow control in multiple
number of input/output interfaces.
Input one command to define one
list. Effective in inputting a number
of entries.
Function use, and unused
unit
Device unit Device unit, and input/output
interface unit
GR2000 Operations
Commands, Vol. 2
-
Indication unit for show qos
ip-flow.
Device unit and list unit Device unit and input/output
interface unit
Vacant entry indication Supported. Unsupported.
*1: Total value with entries of filters.