Hitachi GR2000 Series Network Router User Manual


 
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-42 GR2K-GA-0014
Ver. 07-02
4.7.8 PPP Information
Input Format
Parameters
TheinitialvalueitemsthatcanbesetusingPPPInformationandtheinitialvalues
during initial installation are shown in Table 4-8. For details of each parameter, refer
to the configuration definition information in "PPP Information".
Table 4-8 List of Initial Values that Can Be Set Using PPP Information and Initial
Values During Initial Installation
Information
Group Name
Information Name Initial Value
PPP
information
Maximum data length that can be received using PPP
protocol (Maximum value of MTU length in remote router)
4500 bytes
Number of Echo-RQ frame retries using PPP protocol
(Link quality monitoring function)
7times
Number of Echo-Reply reception times for judging a
high-quality link using PPP protocol (Link quality
monitoring function)
6times
Echo-RQ transmission interval using PPP protocol (Link
quality monitoring function)
3 seconds
Report of local address to the remote router using PPP
protocol
Not reported.
Operation when the remote router reports IP address using
PPP protocol by IP address negotiation
A correct IP address is
distributedasanIP
address distribution
request (assign).
Report of local IPX node number to the remote router
using PPP protocol
Not reported.
Selection of IPV6CP used or not used by PPP protocol Used.