Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-43
Ver. 07-02
1.1.6 flow filter (IPv6) [ROUTE-OS6]
Input Format
Setting
Setting and changing the global information by each input/output interface.
[set] flow filter <Interface Name> {in | out} [-disable]
Setting and changing the flow information.
Flow cetecting condition
1. When the high order protocol is other than TCP, UDP and IGMPv6.
2. When the high order protocol is TCP.
3. When the high order protocol is UDP.
4. When the high order protocol is ICMPv6.
Changing only the operation designation.
Deletion of the information
Indication of the information
Indication of a blank list number in the specified range
*
Note: 1: If the "flow detecting condition" and the operation designation (*1) are set or changed
simultaneously, input the operation designation after the "detecting condition2.
Note: 2: If the parameters in the "flow detecting condition" and the operation designation are to
be changed, input all the setting contents again.