Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-25
Ver. 07-02
The flow control is judged in the order of list numbers specified in the input/output
interface of filter flow information (in the order of the display during execution of a
show flow filter). Configuration definition qos-ip-list and filter-list cannot be set when
this command is set.
The number of entries, in a filter list and QoS list, which can be generated is 10000
(maximum) per router and 2000 (maximum) per RP. However, the maximum number
of entries that can be defined by RM-installed memory size differs. Table 1-20, below,
lists the maximum number of entries that can be defined for each model and
RM-installed memory size.
Table 1-20 Maximum Definable Entries by Each PM Mounting Memory Size
Model
RM Mounting
Memory Size
Number of entry (*1)
Unit
RP unit Tunnel
RP Type (Entry)
(Entry)
[ROUTE-OS6]
GR2000-2S All 1024 RP-A1 1024(*2) --(*3)
GR2000-4S 64MB, 128MB,
192MB
1024 RP-A1, RP-C, RP-D 1024 (*2) --(*3)
RP-C6, RP-CV,
RP-DV, RP-D6
1024 1024
256MB or more 2000 RP-A1 1024 (*2) --(*3)
RP-C, RP-D 2000 (*2)
RP-C6, RP-CV,
RP-DV, RP-D6
2000 2000
GR2000-6H 64MB, 128MB,
192MB
1024 RP-A1, RP-C, RP-D 1024 (*3) --(*3)
RP-C6, RP-D6,
RP-CV, RP-DV
1024 1024
256MB or more 6000 RP-A1 1024 (*3) --(*3)
RP-C, RP-D 2000 (*3)
RP-C6, RP-D6,
RP-CV, RP-DV
2000 2000
GR2000-10H 64MB, 128MB,
192MB
1024 RP-A1, RP-C RP-D 1024 (*3) --(*3)
RP-C6, RP-D6,
RP-CV, RP-DV,
1024 1024
256MB or more 10000 RP-A1 1024 (*3) --(*3)
RP-C, RP-D 2000 (*3)
RP-C6, RP-D6,
RP-CV, RP-DV,
2000 2000
GR2000-20H 64MB, 128MB,
192MB
1024 RP-A1, RP-C, RP-D 1024 (*3) --(*3)
RP-C6, RP-D6,
RP-CV, RP-DV,
1024 1024
256MB or more 10000 RP-A1 1024(*3) --(*3)
RP-C, RP-D 2000 (*3)
RP-C6, RP-D6,
RP-CV, RP-DV,
2000 2000
GR2000-1B
GR2000-2B
GR2000-2B+
128MB 1000 -- 1000 1000
256MB 2000 -- 2000 2000
GR2000-BH 512MB, 768MB,
1GB
2000 -- 2000 2000
*1: This indicates the total value of filter and QoS entries.
*2: The number of entries in an IPv6 filter is 256 per router and 16 per interface. IPv6 Qos cannot be set.
*3: Cannot be set IPv6 filter or IPv6 QoS in RP-A1, RP-C and RP-D.