Hitachi GR2000 Series Network Router User Manual


 
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-40 GR2K-GA-0014
Ver. 07-02
4.7.6 line Information (ATM)
Input Format
Parameters
TheinitialvalueitemsthatcanbesetusinglineInformation(ATM)andtheinitial
values during initial installation are shown in Table 4-6. For details of each
parameter, refer to the configuration definition information in "line (line Information)
25Mbps ATM/ OC-12c ATM".
Table 4-6 List of Initial Values That Can Be Set Using Line Information (ATM
Information) and Initial Values During Initial Installation
Information
Group Name
Information Name Initial Value
line Information
(ATM)
Selection of clock in OC-3c ATM Line external (External synchronization)
Physical layer frame format and empty cell
format in OC-3c ATM Line
sdh_idle (Physical layer frame format:
SDH(STM-1, STM-4), empty cell format: ITU-T
specifications)
Transmission interval of ATM PVC Trap in
OC-3c ATM Line
30 seconds
Selection of clock in OC-12c ATM Line external (External synchronization)
Physical frame format and empty cell format in
OC-12c ATM Line
sdh_idle (Physical layer frame format:
SDH(STM-1, STM-4), empty cell format: ITU-T
specifications)
Transmission interval of ATM PVC Trap in
OC-12c ATM Line
30 seconds
Transmission interval of ATM PVC Trap in 25M
ATM Line
30 seconds