Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-32 GR2K-GA-0014
Ver. 07-02
export: invalid autonomous system value at
<Value> not in range 1 to 65534
AS number is invalid. Specify a value within the range of 1 to 65534.
<Value>: Specified AS number
export: invalid {BGP|BGP4+}
{metric|localpref} metric value at <Metric> not
in range 0 to 65535
In export definition, the BGP/BGP4+ metric is invalid. Specify a value
within the range of 0 to 65535.
<Metric>: Specified metric value
export: invalid domain-number value at
<Domain Number> not in range 1 to 65535
OSPF or OSPFv3 domain number value is out of valid range. Specify
value within the range of 1 to 65535.
<Domain Number>: Specified domain number
export: invalid export-type value at <Value>
not in range 1 to 2
AS external-route type is invalid. Use 1 or 2.
<Value>: Specified AS external type
export: invalid external-route-tag value at
<Value> not in range 0 to 2147483647
AS external-route tag value is invalid. Specify a value within the
range of 0 to 2147483647.
<Value>: Specified As external tag value.
export: invalid high end of range value at
<Value> not in range 0 to {32|128}
In the between specification, upper limit value of mask range is
invalid. Specify a value within the range of 0 to 32/128.between
<Value>: Specified upper limit value of mask
export: invalid {Inet|IPv6} mask bits value at
<Value> not in range 0 to {32|128}
At masklen/prefixlen, the mask length is invalid. Specify a value
within the range of 0 to 32/128.
<Masklen>: Specified mask length
export: Invalid interface name ’<Interface
Name>’
The multi-home interface is specified. Do not specify multi-home
interface.
<Interface Name>: Specified interface name
export: invalid low end of range value at
<Value> not in range 0 to {32|128}
In the between specification, lower limit value of mask range is
invalid. Specify a value within the range of 0 to 32/128.
<Value>: Specified lower limit value of mask
export: invalid number of communities value
at <Value> not in range 0 to 25
Specified community count is over the limit. Specify a value up to 25.
<Value>: Specified communities value
export: invalid number of route-filter lists value
at <Value> not in range 1 to 8
Specified route filter count is over the limit. Specify a value up to 8.
<Value>: Specified communities value
export: invalid octet value at <Value> not in
range 0 to 255
More than 255 values are defined in dot notation. Specify within the
range of 0 to 255.
<Value>: Specified value
export: invalid { OSPF | OSPF6 } metric offset
value at <Metric> not in range 1 to 16777215
The range for specifying OSPFASE/OAPF6ASE metric offset values
in export definition is invalid. Specify within the range of 1 to
16777215.
<Metric>: Specified metric offset value
export: invalid {OSPF|OSPF6} metric value at
<Metric> not in range 0 to 16777215
OSPFASE/OSPF6ASE metric in the configuration information is
invalid. Specify a value within the range of 0 to 16777215.
<Metric>: Specified metric value
export: invalid policy group number value at
<Group Number> not in range 1 to 16
Policy group number value is out of valid range. Specify value within
the range of 1 to 16.
<Group Number>: Specified policy group number
export: invalid range end: <Value> In Aspath_term{m,n}, m>n or n is more than 256. Reduce start value
to more than end value or assign a value less than 255 to the end
value.
<Value>: Specified end value (n)
export: invalid range start: <Value> In aspath_term{m,n}, {m}, {m,}, m is more than 256. Specify a value
less than 255.
<Value>: Specified start value (m)
export: invalid { RIP | RIPng } metric offset
valueat<Metric>notinrange1to15
The range for specifying RIP/RIPng metric offset values in export
definition is invalid. Specify within the range of 1 to 16777215.
<Metric>: Specified metric offset value
Table 5-5 Routing Protocol Error Messages (continued)