Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-84 GR2K-GA-0014
Ver. 07-02
2. When the high order protocol is TCP, UDP.
3. When the high order protocol is ICMPv6.
Changing only the operation designation:
Deletion of the information
Indication of the information
Indication of a blank list number in the specified range
Indication of top blank list number in the specified range
*
Note: 1: If the {normal packet flow detecting condition}, [premium {important packet flow
detecting condition}], and the operation specification (*1) are set or changed
simultaneously, input the operation specification after having input the {normal packet
flow detecting condition}, and [premium {important packet flow detecting condition}].
2: When any parameter in the {normal packet flow detecting condition}, [premium
{important packet flow detecting condition}] must be changed. Input all the flow detecting
conditions and the operation specification again.
*1: If the "flow detecting condition" and the operation designation