Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-117
Ver. 07-02
Table 1-60 Combination of Pair Switch
No. Combination of Pair Switch Setting Processing
1 -Pair_synchronized_off -port_pair_off -ip_pair_off Available Checks the O‘ address and high-order
protocol port No. by not switching
source and destination.
2 -ip_pair Available The source and destination upper
protocol port numbers are checked
without being replaced.
Checks the source IP address by both
cases of switching/not switching source
and destination.
3 -port_pair -ip_pair_off Available Checks the source high-order protocol
No. by both cases of switching/not
switching source and destination.
The source and destination IP
addresses are checked without being
replaced.
4 -ip_pair Available
(Default)
For the IP address and upper protocol
port number, the source and destination
are checked in both cases below.
• When they are not replaced
• When they are replaced
5 -pair_synchronized -port_pair_off -ip_pair_off Available For the IP address and upper protocol
port number, the source and destination
are checked in the cases below.
• When both of them are not replaced
• When both of them are replaced at
thesametime.
6 -ip_pair Not
available
7 -port_pair -ip_pair_off Not
available
8 -ip_pair Not
available
Table 1-61 Combined Setting of Pair Switch and Possibility of Use
No.
Combined Setting of
Pair Switch (Note)
Possibilityof
Use
Processing
1 -ip_pair_off Possible The source and destination IP addresses are checked without being
replaced.
2 -ip_pair Possible For the IP address and upper protocol port number, the source and
destination are checked in both cases below.
• When they are not replaced
• When they are replaced
*
Note: -port_pair_off/-port_pair and -pair_synchronized_off/-pair_synchronized switches are
invalidated when the upper protocol number is undefined or when numbers other than
6(TCP) or 17(UDP) are defined in the upper protocol number.