Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-83
Ver. 07-02
5.10 MPLS Information
Table 5-10 MPLS Information Error Messages [ROUTE-OS7]
Message Contents
explicit_route: duplicate IP address at
’<Address>’ in list ’<ER name>’
IP address is duplicated.
<Address>: Specified address
<ER name>: Specified route name
explicit_route: invalid IP address ’<Address>’
in ’<ER name>’
IP address is invalid.
<Address>: Specified address
<ER name>: Specified route name
explicit_route: invalid mask value at ’<value>’
in ’<Address>’ notin1to32in’<ER name>’
Mask value is out of range. Set the mask between 1 and 32.
<value>: Specified mask length
<Address>: Specified address
<ER name>: Specified route name
explicit_route: invalid mask value ’<Address>’
’<Mask>’ in ’<ER name>’
Mask value is invalid.
<Address>: Specified address
<Mask>: Specified mask
<ER name>: Specified route name
l2transport: duplicate description in ’<Interface
Name>’
Duplicate definitions.
<Interface name>: interface name
l2transport: duplicate in_exp in ’<Interface
Name>’
Duplicate definitions.
<Interface name>: interface name
l2transport: duplicate interface name
’<Interface Name>’
Duplicate definitions.
<Interface name>: interface name
l2transport: duplicate out_exp in ’<Interface
Name>’
Duplicate definitions.
<Interface name>: interface name
l2transport: duplicate vcid ’<Value>’ in
’<Interface Name>’
Duplicate definitions.
<Value>: VCID value
<Interface name>: interface name
l2transport: invalid replace_value value
’<Value>’ not in range 0 to 7
The value of "replace_value" is invalid.
Set "replace_value" in the range of 0 - 7.
<Value>: replace_value value
l2transport: invalid vcid value ’<VCID>’ not in
range 1 to 4294967295
The value of "replace_value" is invalid.
Set "replace_value" in the range of 0 - 4294967295.
<VCID>: Specified route name
label_switched_path: duplicate
explicit_route_name ’<ER name>’ in ’<LSP
name>’
This is a duplicated definition.
<ER name>: Specified route name
<LSP name>: Specified LSP name
label_switched_path: duplicate flow_map
’<Address>’ in ’<LSP name>’
The destination IP is incorrect. The designated flow_map already has
been registered.
<Address>: Specified address
<LSP name>: Specified LSP name
label_switched_path: duplicate flow_map in
’<LSP name>’
This is a duplicated definition.
<LSP name>: Specified LSP name
label_switched_path: duplicate pinning in
’<LSP name>’
This is a duplicated definition.
<LSP name>: Specified LSP name
label_switched_path: duplicate remote_vpn in
’<LSP name>’
This is a duplicated definition.
<LSP name>: Specified LSP name
label_switched_path: duplicate retry_interval
in ’<LSP name>’
This is a duplicated definition.
<LSP name>: Specified LSP name
label_switched_path: duplicate
secondary_label_switched_path in ’<LSP
name>’
This is a duplicated definition.
<LSP name>: Specified LSP name