Hitachi GR2000 Series Network Router User Manual


 
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-66 GR2K-GA-0014
Ver. 07-02
Flow detecting condition parameter:
Description: Specifies the high-order protocol number of the protocol name.
If all the protocols are taken as the object, ip is specified.
Default: No default is possible.
Range of value: 0 to 255 (ten-decimals). (Please refer to Table 1-20.)
Specifies the transmitter IP address.
If address to be designated is one:nnn.nnn.nnn.nnn
If address is designated by range:nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn
If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa
If all IPv4 addresses are designated:any
Default: No default is possible.
Range of value: IP address (nnn, nnn, nnn, nnn): 0.0.0.0-255.255.255.255
Sub-net mask length (aa): 0-32
Specifies the destination IP address.
If address to be specified is one:nnnn:nnnn:nnnn:nnnn:nnnn
If address is specified by range: nnn.nnn.nnn.nnn-nnn.nnn.nnn.nnn
If designated by sub-net mask length:nnn.nnn.nnn.nnn/aa
If all the IP addresses are specified:any
Default: No default is possible.
Range of value: IP address (nnnn:nnnn:nnnn:nnnn):
0:0:0:0:0:0:0:0-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Sub-net mask length (aaa)0-32
This parameter enables the function that rewrites a DSCP value. It rewrites the
DSCPvaluethatistheuppersixbitsofaTOSfield.ThelowertwobitsofaTOS
field are not rewritten.
Table 1-38 General protocol number
Protocol No. Protocol
1ICMP
6TCP
8EGP
17 UDP
88 IGRP
89 OSPF
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
DSCP CU
High-Order 6 Bits are Designated
DSCP (Differentiated Services Code Point), CU (Current Unused)