Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-23
Ver. 07-02
bgp: as-count only makes sense with external
peers
The ascount parameter is specified in a peer other than an external
peer. Do not specify the ascount parameter in an internal or routing
peer.
bgp: as-count option is not supported the
policy group
as-count option is specified by policy group. Specify the option from
export filter side
bgp: as-override may only be used with
external peers
The AS-override option is set for other than an external peer. The
AS-override option may only be used for the external peer.
bgp: as-override option must be the same in
the policy group
Different AS-override options are used in the policy group. Use the
same AS-override option within the policy group.
bgp: aspath-opt option is not supported the
policy group
aspath-opt option is specified by policy group.
Specify the option from export filter side
bgp: authmd5 must be equal to or greater
than one character
The designated authentication key is less than one character.
Designate the authentication key using between 1 and 80
characters.
bgp: authmd5 "<MD5>" longer than 80
characters
The designated authentication key is longer than 80 characters.
Designate the authentication key by using less than 80 characters.
<MD5> Designated authentication key.
bgp: autonomous-system not specified AS number of this router has not been defined
Define the AS number of the local router before specifying member
AS number
bgp: autonomous-system not specified, and it
is required for BGP
AS number of this router has not been defined.
Define the AS number of the local router.
bgp: capability option must be specified
ipv4-uni or ipv4-vpn
In the capability option, neither ipv4-uni nor ipv4-vpn is defined.
When the capability option is specified, define ipv4-uni or ipv4-vpn.
bgp: capability option must be specified
ipv4-vpn
The ipv4-vpn is not defined by the local peer’s capability option.
When designating the capability option, define the ipv4-vpn.
bgp: clusterid may not be 0.0.0.0 0.0.0.0 is specified to cluster ID.
Use a value other than 0.0.0.0.
bgp: clusterid option not valid for vpn The clustered option is defined for VPN. VPN does not support this.
bgp: confederation peer must have the
member AS
For settings of member-to-member peers, a member AS is essential.
Specify a member AS.
bgp: description "<Name>" longer than 64
characters
The specified ID exceeds 64 characters. Specify ID by 64 or less
characters.
<Name>: Specified identifier
bgp 4: description may only be used in peers. description option is defined by peer group. Define the description
option is peer.
bgp: duplicate bgp clause A bgp definition is duplicated.
Delete one of the two.
bgp: duplicate BGP group found, groups must
differ by type and/or AS
The same peer group is already defined. Use a unique peer group.
bgp: duplicate entries for peer <Address>
found in group type <Type> AS <As>
The same peer is specified. Specify a different peer.
<Address>: Specified peer address
<Type>: Specified peer group
<As>: Specified peer group AS number
bgp: error resolving ’<Host Name>’: Unknown
host
The specified host name cannot be found. Specify the defined host
name.
<Host name>: Specified host name
bgp: external peer must not have the same
AS as we do locally (<As>)
Peer AS number of external peer is the same as local router AS
number. Do not specify AS number of the local router in the peer AS
number of external peer.
<As>: Local router AS number
Table 5-5 Routing Protocol Error Messages (continued)