Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-130 GR2K-GA-0014
Ver. 07-02
4. Show all the contents:
5. Show the contents of interface name
ether1:
6. Delete the definition of inbound of interface name
ether1:
Related Configuration Object
filter
filter-list
filter-group
ip
ip-address
Precaution
1. A maximum of 512 entries of filter interface information per RP can be created
(maximum interface 256, inbound/outbound per interface).
2. Set filter group information, IP information, and IP-address information before
executing this command.
3. More than one filter group cannot be specified for inbound/outbound on one
interface.
4. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.