Filter
Top Products
Operation Management Information
GR2K-GA-0014 4-45
Ver. 07-02
Table 4-10 List of Initial Values that can be set using Frame Relay Information and
Initial Values during Initial Installation
Information
group name
Information name Initial value
frame_relay
information
Procedure of PVC state report using Frame-Relay
protocol
ITU-T Q.933 AnnexA is
executed.
Direction of PVC state report procedure using
Frame-Relay protocol
STATUS ENQ is transmitted
to wait for STATUS
reception.
Transmission of single PVC non-synchronous state
display report using Frame-Relay protocol
Single PVC non-synchronous
state display report is not
transmitted.
Delay time from PVC down detection to logical
interface down detection using Frame-Relay protocol
0second
CLLM reception/monitoring time using Frame-Relay
protocol
No CLLM reception is
monitored.
Maximum information field length using Frame-Relay
protocol (not including the Q922 header)
1600 bytes
dlci information Relay designation of packets using Frame-Relay
protocol (DLCI)
Send/receive packets are
relayed.
Maximum information field length using Frame-Relay
protocol (DLCI) (not including the Q922 header)
1600 bytes
Limit and maximum value of data transmission rate
using Frame-Relay protocol (DLCI)
The transmission rate is not
limited.
Throughput adjustment during detection of frame relay
network congestion using Frame-Relay protocol (DLCI)
No throughput adjustment is
performed.
CIR (Certification Information Rate) using Frame-Relay
protocol (DLCI)
Okbps
Setting of IP packet transmission using Frame-Relay
protocol (DLCI)
IP packets are transmitted.
Setting of IPX packet transmission using Frame-Relay
protocol (DLCI)
IPX packets are not
transmitted (discarded).
Setting of InverseARP transmission using
Frame-Relay protocol (DLCI)
InverseARP is transmitted.
Setting of ARP transmission using Frame-Relay
protocol (DLCI)
ARP is not transmitted.
BC (certification burst size) using Frame-Relay
protocol (DLCI)
0kBytes
BE (excess burst size) using Frame-Relay protocol
(DLCI)
0kBytes
Guarantee value of transmission data rate using
Frame-Relay protocol (DLCI)
0kbps
DE bit of transmission frame using Frame-Relay
protocol (DLCI)
The DE bit is always set to
"0".