Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-85
Ver. 07-02
Parameter
Parameters that can be set for each RP type have been determined. IPv6 QoS can be
executed using RP-C6, RP-D6,GR2000-1B, GR2000-2B, GR2000-2B+ and
GR2000-BH but cannot be executed using RP-A1, RP-C, and RP-D. The list of
parameters that can be set for each RP type using IPv6 QoS information is shown in
Table 1-46 List of Parameters that Can Be Set for Each RP Type Using IPv6 QoS
Information.
Table 1-46 List of Parameters that Can Be Set for Each RP Type Using IPv6 QoS
Information.
Item
Parameter
RP-A1 RP-C, RP-D
RP-C6, RP-D6,
RP-CV, RP-DV
GR2000-1B/2B
Main Item Sub-Item
Input
Side
Output
Side
Input
Side
Output
Side
Input
Side
Output
Side
Flow
detection
conditions
All protocol IPs ip −−−−√√
Protocol number <protocol No.> −−−−√√
Protocol TCP tcp −−−−√√
Protocol UDP udp −−−−√√
Protocol ICMP6 icmp6 −−−−√√
Source IP address <IP_Source> −−−−√√
Destination IP address <IP_Destination> −−−−√√
DSCP dscp <DSCP_Value> −−−−√√
precedence precedence
<precedence_Value>
−−−−√√
IP user data length {upper | lower}
<Length>
−−−−√√
Source port number <Port_Source> −−−−√√
Destination port number <Port_Destination> −−−−√√
ICMPv6 type <ICMPv6_Type> −−−−√√
ICMPv6 code <ICMPv6_Code> −−−−√√
User priority user_priority <No.> −−−−√−
Important packet premium −−−−√√