Hitachi GR2000 Series Network Router User Manual


 
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-58 GR2K-GA-0014
Ver. 07-02
Table 4-18 List of Initial Values That Can Be Set Using QoS Information and Initial
Values During Initial Installation
Information
Group Name
Information Name Initial Value
QoS
information
Queue mode of queue list Output priority control
Number of queues in which the band is equally
assigned when the queue mode of a queue list
is a minimum equal band guarantee
24
Maximum number of queues when the queue
mode of a queue list is a minimum band
guarantee (specified in kbit/s)
8
Minimum band when the queue mode of a
queue list is a minimum band guarantee
(specified in kbit/s)
0
Discard mode Discard mode 3
Check of source and destination IP addresses The source and destination IP
addresses are checked for
replacement without replacement.
Check of source and destination upper protocol
port numbers
The source and destination upper
protocol port numbers are checked
for replacement without
replacement.
Sequential check of IP address and upper
protocol port number
The source and destination IP
addresses, and source and
destination upper protocol port
numbers are simultaneously
checked without replacement,
respectively.
Designation of maximum output priority class 8
Designation of output priority class (for IP) Class 4
Designation of queuing priority class (for IP) Class 4
Designation of output priority class (for IPX) Class 4
Designation of queuing priority class (for IPX) Class 4
Designation of output priority class (for bridge) Class 4
Designation of queuing priority class (for bridge) Class 4
Designation of output priority class (for hdlc) Class 4
Designation of queuing priority class (for hdlc) Class 4