Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-40 GR2K-GA-0014
Ver. 07-02
ospf: Interface not found at ’<Interface
Name>’
The specified interface name cannot be found. Specify the defined
interface name.
<Interface Name>: Specified interface name
ospf: Interface not found at <address> Interface of specified interface address is not found. Use defined
interface address.
<Address>: Specified interface address
ospf: invalid area-number value at <Value>
not in range 0 to 4294967295
<value> not in range 0 to 4294967295
Specified OSPF area ID value is invalid.
Specify a value within the range of 0.0.0.1-255.255.255.255.
<Value>: Specified area ID
ospf: Invalid domain configuration value at ’5’
not in range 0 to 4
The number of configuration definitions of OSPF Domain exceeds
the maximum of 4. Delete one of the configuration definitions of
OSPF Domain.
ospf: invalid domain-number value at
<Domain Number> not in range 1 to 65535
OSPF domain number is out of valid range.
Specify value within the range of 1 to 65535.
<Domain Number>: Specified domain number
ospf: invalid export-type value at <Value> not
inrange1to2
Specified AS external-route type value is invalid. Use 1 or 2.
<Value>: Specified AS external-type
ospf: invalid external-route-tag value at
<Value> not in range 0 to 2147483647
Specified AS external-route tag value is invalid. Specify a value
within the range of 0 to 2147483647.
<Value>: Specified AS external-route tag value
ospf: invalid hello-interval value at <Value>
not in range 0 to 255
In the OSPF definition, the hello-interval value is out of valid range.
Specify a value within the range of 0 to 255.
<Value>: Specified hello-interval value
ospf: invalid inet mask bits value at
<Masklen> not in range 0 to 32
In masklen, the specified mask length is invalid. Use a value within
the range of 0 to 32.
<Masklen>: Specified mask length
ospf: Invalid interface name ’<Interface
Name>’
The multi-home interface is specified. Do not specify multi-home
interface.
<Interface Name>: Specified interface name
ospf: invalid octet value at <Value> not in
range 0 to 255
More than 255 values are defined in dot notation. Specify value
within the range of 0 to 255.
<Value>: Specified value
ospf: invalid OSPF cost value at <Cost> not in
range 0 to 65535
OSPF cost value in the following configuration information is invalid.
Use a value within the range of 0 to 65535.
<Cost>: Specified cost value.
ospf: invalid OSPF interface cost value at
<Cost> not in range 1 to 65535
OSPF interface cost value in the following configuration information
is invalid.
Use a value within the range of 1 to 65535.
<Cost>: Specified interface cost value.
ospf: invalid poll-interval value at <Value> not
inrange0to255
In the OSPF definition, the poll-interval value is out of valid range.
Specify a value within the range of 0 to 255.
<Value>: Specified poll-interval value
ospf: invalid preference value at <Value> not
inrange2to255
Specified preference value is invalid. Specify a value within the range
of 0 to 255.
<Value>: Specified preference value
ospf: invalid priority value at <Value> not in
range 0 to 255
In the OSPF definition, specified priority value is invalid.
Specify a value within the range of 0 to 255.
<Value>: Specified priority value
ospf: invalid range <Address>/<Mask> In the OSPF definition, specified network value is invalid (0.0.0.0).
Use a value other than 0.0.0.0.
<Address>: Specified address
<Mask>: Specified mask
Table 5-5 Routing Protocol Error Messages (continued)