Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-86 GR2K-GA-0014
Ver. 07-02
mpls: duplicate explicit_route_name ’<ER
name>’
The name is in existence. Use the explicit_name which is not used
other blocks.
<ER name>: Specified route name
mpls: duplicate label_switched_path_name
’<LSP name>’
The name is in existence. Use the label_switched_path_name which
is not used other blocks.
<LSP name>: Specified LSP name
mpls: duplicate l2transport Duplicate definitions.
mpls: duplicate lsp path to same destination
’<address>’
The LSP to the same destination is in duplicated definition.
<Address>: Specified address.
mpls: duplicate lsr This is a duplicated definition.
mpls: duplicate platform_label_range This is a duplicated definition.
mpls: duplicate topology_driven This is a duplicated definition.
mpls: explicit_route is empty with used ’<ER
name>’
The empty explicit_route is used.
<ER name>: Specified route name
mpls: interface not found at ’<Interface
Name>’
The specified interface does not exist.
Set the interface name correctly.
<Interface name>: Interface name
mpls: invalid platform_label_range value
’<Label>’ not in range 16 to 1048575
platform_label_range value is out of range. Specify label value within
the range of 16 to 1048575.
<Label>: Label value
mpls: invalid platform_label_range value
’<Range>’ not in range 16 to 1048575
platform_label_range value is out of range. Specify within the range
of 16 to 1048575.
<Range>: Range value
mpls: invalid vpn <VPN> IP configuration
<Name>.
<VPN> of IP information <Name> is invalid. Set proper <VPN>.
<Name> Name assigned to the configuration definition information
<VPN> VPN defined in the configuration definition information
mpls: l2transport not specified ’<Interface
Name>’
The L2 transport is not set.
Set the L2 transport in the line definition.
<Interface name>: Interface name
mpls: No enough memory Internal data memory supplement was failed.
mpls: number of CRLSP should be less than
256
The upper limit for CRLSP is 255.
mpls: range should not be less than label platform_label_range value is invalid. For the “range”, set a value
greater than that for the label.
mpls: The interface is neither ethernet nor
gigabit_ethernet.
The specified interface is neither Ethernet nor gigabit Ethernet.
Set an Ethernet or gigabit Ethernet interface.
mpls: too many MPLS definitions The MPLS information has exceeded the maximum allowance.
Multcast and MPLS can not be set up
simultaneously.
Multcast and MPLS can not be set up simultaneously
policy_mpls :’ <LSP Name>’ is invalid. The name of LSP specified for a policy_mpls parameter of the flow
filter must have been defined for label_switched_path. For the name
of LSP specified for a policy_mpls parameter of the flow filter, use
one already defined for label_switched_path. To delete from
label_switched_path the name of LSP specified for a policy_mpls
parameter of the flow filter, delete the policy_mpls parameter
beforehand.
<LSP name>: Specified LSP name
policy_mpls :’ <LSP Name>’ syntax error The length of the LSP name specified for a policy_mpls parameter of
the flow filter is illegal. For the name, use 1 to 14 characters.
<LSP name>: Specified LSP name
secondary_label_switched_path: duplicate
explicit_route_name in ’<LSP name>’
This is a duplicated definition.
<LSP name>: Specified LSP name
Table 5-10 MPLS Information Error Messages [ROUTE-OS7] (continued)