Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-13
Ver. 07-02
The total of traffic cbr pcr, vbr scr, and abr mcr
exceeded vp pcr.
The total of traffic cbr pcr, vbr scr, and abr mcr exceeded vp pcr. Set
the total traffic to VP’sPCRorless.
The total of traffic gfr mcr exceeded vp pcr. The total of traffic gfr mcr exceeded vp pcr. Set the total traffic to
VP’sPCRorless.
The total of traffic gfr2 mcr exceeded vp pcr. The total of traffic gfr2 mcr exceeded vp pcr. Set the correct value.
Timeslot number not specified. Timeslot number has not been specified. Specify a timeslot number.
Traffic not specified. Traffic has not been specified. Specify traffic.
Tunnel interface is not defined. Tunnel interface is not defined. The 256th interface cannot be set
when a tunnel interface is defined. Reconfirm the number of IP
interfaces.
Can not change tunnel type. It is not possible to change configured tunnels to 6to4 tunnels and
vice versa.
Set new definitions after deleting tunnel interface information.
6to4 tunnel is already defined. 6to4 tunnel is already defined.
1 6to4 tunnel can be defined per device.
Type not specified. Traffic type has not been specified. Specify traffic type.
Vpi not specified. Vpi has not been specified. Specify vpi.
width is not in range of 1 to 2. Timeslot width is not in range. Set timeslot width in range of 1 to 2.
width is not in range of 1 to 24 or not 48, 72,
96.
Timeslot width is not in range. Set timeslot width in range of 1 to 24
or 48, 72, 96.
width is not in range of 1 to 24. Timeslot width is not in range. Set timeslot width in range of 1 to 24.
width is not in range of 1 to 31. Timeslot width is not in range. Set timeslot width in range of 1 to 31.
Width not specified. Timeslot width has not been specified. Specify a timeslot width.
<item> is not in range <value1> to <value2>. <item> is not in range. Set <item> in range.
<item> Parameter name, <value1>Minimum value <value2>
Maximum value
<Option> out of range. <Option> is out of range. Check <option>.
Table 5-3 Network Interface Error Messages (continued)