Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-10 GR2K-GA-0014
Ver. 07-02
Description: This specifies the DLCI name for Frame Relay, or VC name for
ATM.
Default: Cannot be omitted
Examples
1. Setting parameters
To set
vpvc2 to MAC address to 11:11:11:11:11:11 and dlci2 to
12:11:11:11:11:11,forWAN-FR:
2. Changing parameters
To change the ARP entry MAC address
11:11:11:11:11:11 to vpvc1:
3. Displaying settings
To display all ARP table information:
4. Deleting settings
To delete an ARP entry of MAC address
12:11:11:11:11:11:
Related Commands
ipx
ipx-interface
dlci
vc
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the apply command is not being executed, the apply subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.