Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-29
Ver. 07-02
{in|out}
Inbound/Outbound is designated. Either one or both of the Inbound/Outbound
can be set simultaneously.
in :Inbound (Designation of frame input side)
out:Outbound (Designation of frame output side)
Default: No default is possible.
[-disable]
The flow control is nullified by each input/output interface.
Default: No default is possible.
list <List No.>
The list numbers are designated.
Default: Defaultispossibleonlyforthecaseofindication.Allthelists
are indicated at default.
Range of value: IPv4 filter list: 1 to 20000 (decimal)
[list <List No.>-list <list No.>]
Description: Specifies the range of a list number. This parameter can be
specified only when a blank list number is displayed.
Default: Therangeofthelistnumbertobedisplayedcorrespondstoall
list numbers.
Range of value: IPv4 filter list: 1 to 20000 (Decimal)
IPv6 filter list: 40001 to 60000 (Decimal)
free
Description: Displays the blank list number.
Default: Cannot be omitted when the blank list number is displayed.
min_no
Description: Displays the top blank list number in the specified range.
Default: Cannot be omitted when the top list number of a blank list
number is displayed.
Flow detecting condition parameter
{ ip | <protocol No.> | tcp | udp | icmp | igmp }
Description: The high-order protocol numbers or protocol names are
designated. If all protocols are taken as the object, IP is
designated.
In case of IPv4 filter list, icmp6 cannot be designated. In case
of IPv6 filter list, icmp and igmp cannot be designated.
Default: No default is possible.
Range of value: 0 to 255 (decimal). (Please refer to Table 1-22.)