Filter
Top Products
SNMP Information
GR2K-GA-0014 3-3
Ver. 07-02
This parameter limits the moment at which coldstart trap is issued. The moment
at which coldstart trap is issued during setting of this parameter is outlined in
the table below.
Default: limited_coldstart_trap
Range of value: limited_coldstart_trap or unlimited_coldstart_trap is specified.
This parameter specifies the moment at which link up/down trap is issued. The
moment at which link up/down trap is issued during setting of this parameter is
outlined in the table below.
Default: protocol
Range of value: interface or protocol is specified.
!
Caution: When 1 to 3 is specified in <Level>, the operation is the same as when 3 is specified.
Table 3-2 Trap System Message Levels
Level Meaning
9 Fatal failure.
8 Serious failure or greater.
7 RM failure or greater.
6 NIF failure or greater.
5 Standby system failure or greater.
4 Network system failure or greater.
1-3 Warning level or greater.
Parameter Moment at Which coldstart trap is Issued
limited_coldstart_trap • When the router starts (the router power is turned on or active RM
restarts).
• When active RM is switched to standby RM.
• When the current configuration definition information is changed using a
config copy command.
• When the configuration information (config ip command) of IP is added
and deleted.
• When the time is changed using a date command
unlimited_coldstart_trap • When the router starts (the router power is turned on or active RM
restarts).
• When active RM is switched to standby RM.
Parameter Moment at Which link up/down trap is Issued
Interface • Traps are sent prompted by up/down in the physical interface.
Protocol • Traps are sent prompted by link connection and disconnection at the
protocol level.