Filter
Top Products
Operation Management Information
GR2K-GA-0014 4-41
Ver. 07-02
4.7.7 Subline Information (WAN)
Input Format
Parameters
The initial value items that can be set using subline Information (WAN) and the
initial values during initial installation are shown in Table 4-7. For details of each
parameter, refer to the configuration definition information in "subline (subline
Information)."
Table 4-7 List of Initial Values That Can Be Set Using Subline Information (WAN Line)
and Initial Values During Initial Installation
Information
Group Name
Information Name Initial Value
Subline
information
(WAN line)
Selection of E1 physical layer multi-frame
format in E3
CRC-4 Multiframe (crc4)
Setting value of E1 national multi-bit in E3 0 (hexadecimal)
(2
7
:SI,2
6
: Unused, 2
5
:Unused,2
4
: SA-4,
2
3
: SA-5, 2
2
: SA-6, 2
1
: SA-7, 2
0
: SA-8)
Selection of E1 timeslot multi-line rate in
E3
64 kbps (64)
Selection of T1 physical layer multi-frame
format in T3
ESF (Extended Superframe) (esf)
Selection of T1 timeslot multi-line rate in
T3
64 kbps (64)