Filter
Top Products
299
CHAPTER 13 UART
13.4.6 Clock Divider Selection Register (UPC)
The clock divider selection register is used to generate the UART reference clock by
dividing the oscillation frequency. It also enables/disables operation of the prescaler for
creating the reference clock.
■ Clock Divider Selection Register (UPC)
Figure 13.4-8 Clock Divider Selection Register (UPC)
PR2
PR1
PR0
000
001
010
011
100
101
110
11
PREN
0
1
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
002C
H
PREN PR2 PR1
PR0
----0010
B
R/W R/W R/W R/W
R/W
Address Initial value
Clock divider selection bits
Divider
Divides the clock by 1.
Divides the clock by 2.
Divides the clock by 2.5.
Divides the clock by 3.
Divides the clock by 4.
Divides the clock by 5.
Do not specify this setting.
Do not specify this setting.
UART prescaler operation enable bit
Disables the prescaler operation.
Enables the prescaler operation.
: Readable/Writable
: Unused
: Initial value
1