Toshiba 3511 All in One Printer User Manual


 
e-STUDIO3511/4511 CONTROL PANEL 5 - 6 November 2003 © TOSHIBA TEC
5
Interrupt copying is accepted
Interrupt copying is cancelled (finished)
Displayed when reproduction ratio is set to
be over 200% at AMS Mode on RADF
Displayed when reproduction ratio is set
manually to be over 200% on RADF
Displayed when the template stored is
recalled by pressing [TEMPLATE] button
Displayed when a button is pressed while the
department management setting is available
Displayed when the number of printouts
exceeds the limit number of department
counter
Displayed when the number of printouts
exceeds the limit number of department
counter
Displayed when the number of printouts
exceeds the limit number of department
counter
Displayed when the number of printouts
exceeds the limit number of department
counter
Displayed when confirming the user to print
out the data as much as stored at memory
- full state
Displayed when confirming the user to send
the FAX data as much as stored at memory
- full state
Displayed when confirming the user to save
the scanning data as much as stored at
memory-full state
Displayed when confirming the user to print
out the data as much as stored at memory-
full state
Displayed when confirming the user to send
the FAX data as much as stored at memory-
full state
Set the reproduction ratio 200% or
below manually
Set the reproduction ratio 200% or
below
Displayed only in FAX Function
Displayed only in FAX Function
Displayed only in FAX Function
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
Job interrupted job 1
saved
Ready to resume job
1
Cannot use AMS
mode
More than 200% is
not available
Updated the template
setting
Enter Department
Code
Cannot copy BLACK
mode Check
DEPARTMENT
COUNTER
Cannot copy FULL
COLOR mode Check
DEPARTMENT
COUNTER
Cannot copy TWIN
COLOR mode Check
DEPARTMENT
COUNTER
Cannot copy Check
DEPARTMENT
COUNTER
Not enough memory
to store original(s)
Will you print out
stored originals?
Not enough memory
to store original(s)
Will you send stored
originals in?
Not enough memory
to store original(s)
Will you save stored
originals in?
The number of
originals exceeds the
limits Will you copy
stored originals?
The number of
originals exceeds the
limits.
Will you send stored
originals?
No. Message State of equipment Note