Filter
Top Products
e-STUDIO3511/4511 GENERAL OPERATION 4 - 10 November 2003 © TOSHIBA TEC
4
• Exit sensor detects jamming of the trailing edge of
paper
Registration clutch turned OFF
↓ Approx 1.3 sec*
Exit sensor turned OFF
If the exit sensor is not turned OFF
after approx 1.3 seconds,
↓
Paper jam (E020) → The copying operation is
stopped.
• Immediately after the power ON
↓
Any of all sensors on paper transport path detects paper (ON)
↓
Paper jam (E030)
• Front cover is opened during copying
↓
Paper jam (E410)
• Registration sensor detects jamming of the leading edge of paper:
The registration sensor is not turned ON in a fixed period of time after the leading edge of paper
passed the transport roller.
↓
Paper jam (E120, E200, E210, E300, E330 and E3C0)
• During paper feeding from ADU:
The registration sensor is not turned ON in a fixed period of time after the ADU clutch is turned
ON.
↓
Paper jam (E110)
• During paper transporting from ADU:
ADU entrance/exit sensors do not detect the paper at the fixed timing
↓
Paper jam (E510 and E520)
• During paper feeding from the equipment or PFP:
The registration sensor is not turned ON in a fixed period of time after the feed clutch is turned
ON.
↓
Paper jam (E220, E310, E320, E340 to E360, E3D0 and E3E0: Error code defers depending on
the paper source.)
Registration clutch
Exit sensor
Timer
ON
OFF
Approx 1.3 sec.
Paper jam (E020)
Fig. 4-302