Filter
Top Products
November 2003 © TOSHIBA TEC 12 - 25 e-STUDIO3511/4511 DEVELOPER UNIT
12
Fig. 18-835
Switch
bracket
[D] Black toner supply unit
(1) Take off the laser optical unit ( Chapter 8.6
[A]).
(2) Take off the transfer belt unit ( Chapter 14.7
[A]).
(3) Take off the front cover ( Chapter 2.5.1 [A]).
(4) Take off the toner bag ( Chapter 2.5.1 [A]).
(5) Take off the black developer unit ( Chapter
12.8 [A]).
(6) Take off the cleaner unit ( Chapter 11.7 [A]).
(7) Take off the discharge LED unit ( Chapter
11.7 [F]).
(8) Take off the front lower cover ( Chapter 2.5.1
[D]).
(9) Take off the front right cover ( Chapter 2.5.1
[E]).
(10) Remove 2 screws and take off the bracket of
the front cover opening/closing switch. (It is
not necessary to disconnect the connectors.)
Fig. 12-837
Fig. 12-836
(12) Remove 2 screws and take off the cleaner
rail stay.
(11) Remove 1 screw and 1 clip, take off the transfer
belt contact lever. And then, take off the shaft.
Shaft
Lever
Cleaner rail stay
Clip