Filter
Top Products
e-STUDIO3511/4511 GENERAL OPERATION 4 - 8 November 2003 © TOSHIBA TEC
4
• When the power is turned ON or LCF drawer is inserted (When the power is turned ON or equip-
ment/PFP drawers are inserted).
LCF performs initialization.
↓
Detects the presence of paper
Tray-up motor ON - The tray goes up
At this time, the tray-up sensor and LCF empty sensor are OFF.
→ When the tray-up sensor is not turned ON in a fixed period of time it means that the tray
is in abnormal condition
“Add paper” is displayed regardless of presence/absence of paper
↓
Cleared by turning the power ON/OFF
→ Tray-up sensor is turned ON in a fixed period of time.
- The tray motor stops.
At this time, if the empty sensor is ON - It is judged that there is paper.
OFF - It is judged that there is no paper.
↓
Drawer area of the illustration blinks.
(When the drawer is selected)
• When the paper in the drawer gets short during copying,
→ The tray-up sensor turned OFF
→ The tray-up motor turned ON - Tray goes up
→ Tray-up sensor turned ON
→ Tray-up motor stopped
• Empty sensor turned OFF during the copying in spite of the tray-up sensor is ON
It is judged that there is no paper.
↓
Drawer area of the illustration blinks.
(When the drawer is selected)
↓
The copying operation is stopped.