Filter
Top Products
e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 24 November 2003 © TOSHIBA TEC
10
[I] Middle guide
(1) Remove 2 screws and take off the 2nd transfer
front guide.
Fig. 10-453
Fig. 10-454
Fig. 10-455
(2) Remove 2 screws and take off the middle guide.
Note: When taking off the middle guide, pay
attention not to drop the removed paper dust
from the brush into the inside of the
equipment.
(3) Clean the paper dust removal brush attached
on the middle guide.
Note: When installing the 2nd transfer front guide,
push the 2nd transfer front guide upward
and screw it at the position the guide is
pushed to the transfer belt unit.
2
1
2nd transfer front guide
2nd transfer front guide
Middle guide