Filter
Top Products
November 2003 © TOSHIBA TEC 10 - 15 e-STUDIO3511/4511 PAPER FEEDING SYSTEM
10
(A-7) Bypass feed roller
(1) Remove 4 screws and take off the bypass feed
unit.
(2) Remove 1 clip and take off the bypass feed
roller by sliding it.
Fig. 10-417
Fig. 10-418
Bypass feed unit
Clip
Bypass feed roller
(A-8) Bypass separation roller
(1) Remove 3 screws and take off the lower plate
cover.
Fig. 10-419
Fig. 10-420
Lower plate cover
Bypass separation roller
(2) Take off the bypass separation roller.
Note: Lubricate the bypass separation roller on
every replacement. Refer to the Service
Handbook for more details.