Filter
Top Products
November 2003 © TOSHIBA TEC 14 - 7 e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT
14
Fig. 14-705
Fig. 14-706
Fig. 14-704
(8) Loosen 3 screws and take off the bracket.
(9) Lift up the transfer belt cleaning unit and move
it out to the front side temporarily. Then place
the unit on the rear frame and front frame.
(10) Pull out the transfer belt unit.
Notes:1. When installing or taking off the transfer
belt unit, be careful not to scratch the
transfer belt.
2. Do not touch the transfer belt surface with
bare hands.
Transfer belt cleaning unit
Transfer belt unit
Bracket
3.When the transfer belt unit has been
installed or contact/release operation of
the unit has been performed, press the
unit down until the unit is securely fixed
(as shown in the figure at right) to engage
the transfer belt drive gear.
Fig. 14-707
04/05