Filter
Top Products
November 2003 © TOSHIBA TEC 10 - 5 e-STUDIO3511/4511 PAPER FEEDING SYSTEM
10
10.2 Description of Operation
10.2.1 Operation of bypass pickup roller
When the bypass pickup solenoid is turned ON, the plunger is pulled, and then the lever is rotated. The
pickup arm is then brought down with its own weight. When the bypass pickup solenoid is turned OFF,
the pickup arm is brought up by the spring force.
The driving force transmitted through the bypass feed clutch is transmitted to the bypass feed roller
through the shaft and then to the bypass pickup roller through the timing belt. The roller is rotated by this
driving force.
Spring
Pickup roller
Bypass pickup solenoid
Lever
Pickup arm
Fig. 10-201