Filter
Top Products
e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 12 November 2003 © TOSHIBA TEC
10
(4) Remove 3 screws and release 4 latches.
Take off the upper cover of the bypass tray.
(5) Remove 1 screw and the plate spring.
(6) Remove 1 screw (indicated with a white arrow)
from the back side, then take off the bracket.
Bracket
Plate spring
(A-2) Bypass tray slide guide width detection
PC board
(1) Release the harness from 1 harness clamp
and disconnect 1 connector.
(2) Remove 2 screws and take off the hinge unit.
(3) Detach the bypass tray from the protrusion at
the fulcrum of the frame.
Fulcrum
Bypass tray
Fig. 10-405
Fig. 10-406
Fig. 10-407
Fig. 10-408
Latch
Latch
Bypass tray upper cover