Filter
Top Products
e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 22 November 2003 © TOSHIBA TEC
10
(4) Turn the tray drive unit. Release 6 latches and
take off the cover.
Note: When taking off the cover, be careful of the
spring inside the tray drive unit which
pushes the cover.
(5) Take off the tray-up motor.
Note: When assembling the tray drive unit, match
the gear bosses with the holes of the cover.
Latch
Cover
Bosses
Tray-up motor
(3) Disconnect 1 connector, remove 4 screws and
take off the tray drive unit.
Fig. 10-445
Fig. 10-446
Fig. 10-447
Fig. 10-448
Bracket
Latch
Latch
Latch
[F] Tray drive unit
(1) Take off the fuse PC board bracket
Chapter 2.5.2 [H]).
(2) Remove 2 screws and take off the bracket.
Tray drive unit
04/05