Filter
Top Products
16
e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 28 November 2003 © TOSHIBA TEC
(3) Disconnect 1 connector and take off the IH
control board cooling fan.
FLOW
IH control board
cooling fan
Fig. 16-749
Connector
Fig. 16-750
Fig. 16-751
Fig. 16-752
[O] Scraper
(1) Take off the fuser unit ( Chapter 16.7 [A]).
(2) Remove 2 screws and take off the jam access
cover.
(3) Remove 4 screws and take off the cover.
(4) Remove 2 screws and take off the scraper.
Notes:1. Before installing or taking off the scraper,
confirm that the pressure releasing levers
are up.
2. Be careful not to scratch the fuser belt.
Scraper
04/01