Filter
Top Products
November 2003 © TOSHIBA TEC 16 - 7 e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION
16
16.4.4 Relation between system configuration and IH output
for NAD, SAD, TWD:
* RADF: Reversing automatic document feeder, FIN: Finisher, HPU: Hole punch unit, LCF: Large
capacity feeder, FAX: FAX unit
(*1) The wattage lowers 50 W more when the scanning is performed from the RADF during warming up.
(*2) AC power should be input voltage when the equipment is warming up (The lower the voltage is, the
longer the warming up time becomes).
System configuration
Equipment only
Equipment and
RADF
(*1)
Equipment, RADF
(*1)
and FIN
Equipment, RADF
(*1)
,
FIN, and HPU
Equipment, RADF
(*1)
,
FIN, HPU and LCF
Equipment, RADF
(*1)
,
FIN, HPU, LCF and
FAX
Warming up
(*2)
1160-1300W
1160-1260W
1140-1240W
Ready
800W
Printing
1080W
1020W
960W
940W
Energy saving
mode
800W
Automatically
OFF
OFF
Warming up
time
Approx
40 sec.
for ASD, AUD, CND:
System configuration
Equipment only
Equipment and
RADF
(*1)
Equipment, RADF
(*1)
and FIN
Equipment, RADF
(*1)
,
FIN, and HPU
Equipment, RADF
(*1)
,
FIN, HPU and LCF
Equipment, RADF
(*1)
,
FIN, HPU, LCF and
FAX
Warming up
(*2)
1160-1300W
1160-1260W
1140-1240W
Ready
700W
Printing
1240W
1180W
1120W
1100W
Energy saving
mode
700W
Automatically
OFF
OFF
Warming up
time
Approx
40 sec.
04/10