Filter
Top Products
e-STUDIO3511/4511 SCANNER 6 - 22 November 2003 © TOSHIBA TEC
6
[I] Platen sensor
(1) Take off the upper rear cover ( Chapter 2.5.1
[Q]).
(2) Disconnect 1 connector. Release the latches
and take off the platen sensor.
Platen sensor
Carriage home position sensor
Fig. 6-723
[J] Carriage home position sensor
(1) Take off the upper rear cover ( Chapter 2.5.1
[Q]).
(2) Disconnect 1 connector. Release the latches
and take off the carriage home position sensor.
[K] Scanning section control PC board
(SLG board)
(1) Take off the lens cover ( Chapter 6.7 [B]).
(2) Disconnect 7 connectors, remove 6 screws and
take off the SLG board.
SLG board
Fig. 6-724