Filter
Top Products
e-STUDIO3511/4511 GENERAL OPERATION 4 - 6 November 2003 © TOSHIBA TEC
4
4.2.4 Bypass feed copying
(1) Insert a paper into the bypass tray.
• Bypass paper sensor is turned ON.
- “Ready for bypass feeding” is displayed.
• Carriages move to the home position.
(2) Press the [START] button ON
• “Ready for bypass feeding” changes to “COPYING”.
• Exposure lamp ON
• Scan motor ON → Carriages-1 and -2 move forward.
• Main motor, transport motor, developer motor and exit motor turned ON
- The drum, fuser unit, developer unit and exit roller are driven.
• Drum cleaner brush motor turned ON.
(3) Bypass feeding
• Fans rotate in high speed.
• Bypass feed clutch turned ON.
- The bypass pickup roller is lowered.
- The bypass pickup roller, feed roller and separation roller start to rotate.
• Aligning operation
• Paper reaches the registration roller.
• After a certain period of time, the bypass feed clutch turned OFF.
(4) Hereafter, operations (3) through (6) of “4.2.3. Drawer feed copying” are repeated.
4.2.5 Interruption copying
(1) Press the [INTERRUPT] button
• LED “INTERRUPT” is turned ON.
• Copying operation in progress is temporarily stopped, and the carriages-1 and -2 return to
appropriate positions.
• “Job interrupted job 1 saved” is displayed.
• Automatic density and reproduction ratio 100% are set. Set number remains the same.
(2) Select the desired copy condition
(3) After interruption copying is finished:
• “Press interrupt to resume job 1” is displayed.
• LED “INTERRUPT” is turned OFF by pressing the [INTERRUPT] button, and the equipment
returns to the status before the interruption.
• “Ready to resume job 1” is displayed.
(4) Press the [START] button
The copying operation before the interruption is resumed.