Filter
Top Products
November 2003 © TOSHIBA TEC 9 - 15 e-STUDIO3511/4511 DRIVE SYSTEM
9
(14) Remove 2 screws and take off the drum
cleaner brush motor.
Notes:1. When reassembling the unit, make sure
to follow the inverse procedure of
disassembling.
2. Make sure to assemble the unit while all
the belt tensions are loosened. Tense the
belts after reassembling.
3. Rotate the rotor section of the motor for
several times by hand to shake down the
belt while the belt is tense. Then screw
the belt tensioner.
Fig. 9-527
Drum cleaner brush
motor