Filter
Top Products
November 2003 © TOSHIBA TEC 13 - 13 e-STUDIO3511/4511 REVOLVER UNIT
13
Fig. 13-720
(19) Slide the revolver to the front and take off the
bearing attached on the rear side of revolver
rotary shaft from the rear frame. Take off the
revolver unit with the bearing.
Fig. 13-721
Fig. 13-719
Bracket
(16) Remove 5 screws and take off the bracket.
(17) Remove the stopper attached on the front side
of the revolver rotary shaft.
(18) Push in the bearing to the inside of the frame
and take it off from the frame.
Note: Do not unscrew the red painted screws
(6 pcs.) on the revolver unit after taking off
the revolver unit.
Fig. 13-722